Description

• Ideal for freeze protection and low-temperature process maintenance up to 150°F (65°C)
• Automatically adjusts heat output based upon surface temperature and ambient conditions
• Safe to overlap and insulate Moisture, chemical, and flame resistant
• Can be cut-to-length and terminated in the field
• No temperature controller is required*

Specifications

• Continuous Maintenance Temperature: Max 150°F (65°C)
• Intermittent Exposure Temperature: -20°F to 185°F (-29°C to 85°C)
• Output Wattages: 3, 5, 8, 10 W/ft (10, 16, 26, 33 W/m)
• Supply Voltages: 110 to 120 VAC or 208 to 277 VAC

Ordinary Locations
Hazardous (Classified)
Locations Class I, Division 1† and 2, Groups B, C, D
Class II, Division 2, Groups F, G
Class III, Division 1† and 2
3, 5, 8 W/ft T6
10 W/ft T5

Ordinary Locations 130-03 (-G,-W, -S)
Hazardous (Classified) Locations
Class I, Division 1† and 2, Groups B, C, D
Class II, Division 1† and 2, Groups E, F, G
Class III, Division 1† and 2
3, 5, 8 W/ft T6
10 W/ft T5

Hazardous Locations
Ex e IIC T** II 2 GD Gb
Ex tb IIIC T**°C Db
**3, 5, 8 W/ft T5/T85°C
**10 W/ft T4/ T100°C

Hazardous Locations
Ex e IIC T** II 2 Gb
Ex tb IIIC T**°C Db
**3, 5, 8 W/ft T5/T85°C
**10 W/ft T4/ T100°C

Approvals valid only when used with appropriate heating cable and installation accessories,
and installed in accordance with all applicable instructions, codes, and regulations.

†CI/D1 approval for BF only. Contact a BriskHeat representative for information on Division I hazardous location systems.